It is well established in the metal spinning industry that the use of non-metallic rollers offers several advantages when used with softer metals, including copper, brass, aluminum and some stainless steels.

WS HAMPSHIRE, a company who has been offering non-metallic solutions for industrial needs for over 100 years, are proud to announce our new line of Ryertex® MR materials for metal forming wheels.

These proprietary materials allow for smoother finishes on spun surfaces than can be achieved with metal rollers. In many cases, the porous formed surface is so smooth that secondary polishing operations can be eliminated!

These are not your standard non-metallic roller materials - these are enhanced versions specifically designed for the metal spinning industry. They can be used on all standard manual and automatic spinning equipment including M&M, Leifeld, AutoSpin and Denn.

All of these offerings are machinable on standard equipment and can be redressed as needed to extend roller life or change the angle of the roller edge.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Specific Gravity

Tensile Strength

Tensile Elongation

Hardness Shore D

Add To Cart/Request Quote
MR-500 N/A Ryertex® 12,500 Pound Per Square Inch (psi) Tensile Strength Forming Roller for Soft Metal Spinning Equipment N/A 1.14 g/cm³ N/A 12,500 psi N/A 30 % N/A 85 Request Quote
MR-1000 N/A Ryertex® 18,500 Pound Per Square Inch (psi) Tensile Strength Forming Roller for Soft Metal Spinning Equipment N/A 1.40 g/cm³ N/A 18,500 psi N/A 7.5 % N/A 90 Request Quote
MR-2000 N/A Ryertex® 17,500 Pound Per Square Inch (psi) Tensile Strength Forming Roller for Soft Metal Spinning Equipment N/A 1.34 g/cm³ N/A 17,500 psi N/A 12.0 % N/A 90 Request Quote
MR-3000 N/A Ryertex® 15,000 Pound Per Square Inch (psi) Tensile Strength Forming Roller for Soft Metal Spinning Equipment N/A 1.3 g/cm³ N/A 15,000 psi N/A 2.5 % N/A Request Quote
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1