Our molding capabilities include thermoformed growing trays for greenhouse or indoor growing facilities with applications including flood benches, sub-irrigation, and re-circulation systems.  Contact us with your requirements.
CUSTOM FABRICATOR AND SUPPLIER OFNON-METALLIC MATERIALS
All Categories > Materials > Thermoplastics > Bearing and Wear > UHMW > View Items  

UHMW

 
Check up to five results to perform an action.

Ultra High Molecular Weight Polyethylene (UHMW)

UHMW is an exceptionally tough plastic that holds up, even after repeated impact. The abrasion resistance is extraordinary, with low friction under load. Virgin Grade UHMW is also exceptionally resistant to chemical attack including organic solvents. It's easily machined, self-lubricating and absorbs almost no water while providing high dielectric strength, but only moderate compression strength. UHMW operates safely at 160 ºF and doesn't break under IZOD impact testing.

  • Available as sheet/rod/tube
  • Available in virgin or regrind grades
  • Standard colors are white and black
  • Typical applications include wear pads, gears, bearings, corrosion resistant liners
  • Custom fabrication services available from WS Hampshire
UHMW Polyethylene is commonly used in applications such as:



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

Thermoplastic Properties
(PDF, 79KB)

Material Grades
(PDF, 48KB)

Tensile Strength
(PDF, 55KB)

Coefficient of Thermal Exp
(PDF, 55KB)

Impact Resistance
(PDF, 54KB)

Flexural Strength
(PDF, 54KB)

Dielectric Values
(PDF, 55KB)

Cost Comparison
(PDF, 54KB)

   
  Results 51 - 75 of 76 Unit of Measure: Imperial Metric Both 1 2 3 4 

Item #

Grade

Thickness

O.D. x I.D.

Stock Size

Size A

Size B

Size C

Put-Up
PUHM682004 UHMW N/A N/A N/A 0.281 in
7.143 mm 		0.125 in
3.175 mm 		0.343 in
8.731 mm 		Snap-On
PUHM682005 UHMW N/A N/A N/A 0.609 in
15.478 mm 		0.203 in
5.159375 mm 		0.796 in
20.240 mm 		Snap-On
PUHM682006 UHMW N/A N/A N/A 0.125 in
3.175 mm 		0.328 in
8.334375 mm 		0.500 in
12.700 mm 		Snap-On
PUHM665001 UHMW N/A N/A N/A 0.750 in
19.050 mm 		0.250 in
6.35 mm 		3.250 in
82.550 mm 		Dogbone
PUHM681001 UHMW N/A N/A N/A 0.500 in
12.700 mm 		0.750 in
19.050 mm 		1.000 in
25.400 mm 		Half Round Snap-On
PUHM681002 UHMW N/A N/A N/A 0.375 in
9.525 mm 		0.625 in
15.875 mm 		0.875 in
22.225 mm 		Half Round Snap-On
PUHM681003 UHMW N/A N/A N/A 0.250 in
6.350 mm 		0.500 in
12.700 mm 		0.687 in
17.462 mm 		Half Round Snap-On
PUHC682001 UHMW N/A N/A N/A 0.250 in
6.350 mm 		0.625 in
15.875 mm 		1.000 in
25.400 mm 		C Section Strip
PUHC682002 UHMW N/A N/A N/A 0.500 in
12.700 mm 		1.00 in
25.400 mm 		1.500 in
38.100 mm 		C Section Strip
PUHC682003 UHMW N/A N/A N/A 1.000 in
25.400 mm 		0.500 in
12.700 mm 		1.000 in
25.400 mm 		C Section Strip
PUHC682004 UHMW N/A N/A N/A 1.500 in
12.700 mm 		1.500 in
38.100 mm 		2.000 in
50.800 mm 		C Section Strip
PUHP968104 UHMW 0.125 in
3.175 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968106 UHMW 0.188 in
4.762 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968108 UHMW 0.250 in
6.35 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968110 UHMW 0.375 in
9.525 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968112 UHMW 0.500 in
12.7 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968114 UHMW 0.625 in
15.875 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968117 UHMW 0.750 in
19.050 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968122 UHMW 1.000 in
25.400 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968125 UHMW 1.250 in
31.750 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968126 UHMW 1.500 in
38.100 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968127 UHMW 2.000 in
50.800 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968177 UHMW Mechanical/Regrind 0.375 in
9.525 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968182 UHMW Mechanical/Regrind 0.500 in
12.7 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
PUHP968183 UHMW Mechanical/Regrind 0.750 in
19.050 mm 		N/A 48.000 x 120.000 in
1219.2 x 3048 mm 		N/A N/A N/A Sheets
  Results 51 - 75 of 76 1 2 3 4