Our molding capabilities include thermoformed growing trays for greenhouse or indoor growing facilities with applications including flood benches, sub-irrigation, and re-circulation systems.  Contact us with your requirements.
CUSTOM FABRICATOR AND SUPPLIER OFNON-METALLIC MATERIALS
All Categories > Materials > Thermoplastics > Strutural Thermoplastics > Polycarbonate > View Items  

Polycarbonate

 
Check up to five results to perform an action.

Polycarbonate

Polycarbonate is the toughest transparent plastic produced. Outstanding impact strength (it is virtually unbreakable) makes it the material of choice for many industrial applications. It has good electrical insulation properties and low moisture absorption. Polycarbonate is resistant to both heat and flame, and is dimensionally stable and generally unaffected by greases, oils, and acids. Weatherability is good, but slightly below that of acrylic. Ultraviolet rays cause slight discoloring and embrittlement. Polycarbonate tubing offers the advantages of a clear, see-through tubing with the added impact toughness necessary for industrial applications.
  • Can be cut using all machines EXCEPT lasers (it gives off toxic fumes)
  • Can be oven and line bent
  • Can be glued
  • Edges are normally left with router cut, not flame polished
  • Is especially unbreakable with high dielectric properties
  • Available in Plates/Sheets/Tubes
  • Available in clear or smoke tint
  • Custom fabrication services available from WS Hampshire
  • Thermoforming available from WS Hampshire





    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

Thermoplastic Properties
(PDF, 79KB)

Material Grades
(PDF, 48KB)

Tensile Strength
(PDF, 55KB)

Coefficient of Thermal Exp
(PDF, 55KB)

Impact Resistance
(PDF, 54KB)

Flexural Strength
(PDF, 54KB)

Dielectric Values
(PDF, 55KB)

Cost Comparison
(PDF, 54KB)

   
  Results 1 - 25 of 41 Unit of Measure: Imperial Metric Both 1 2 

Item #

Grade

Thickness

Diameter

O.D.

Stock Size

Put-Up
PPCCUSTOM N/A Custom in Custom in Custom in Custom in
Custom ft
Custom mm 		Mechanical Drawing Required
PPCP968164 Polycarbonate 0.031 in
0.7874 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968165 Polycarbonate 0.063 in
1.6002 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968166 Polycarbonate 0.094 in
2.3876 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968167 Polycarbonate 0.125 in
3.175 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968168 Polycarbonate 0.188 in
4.7752 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968169 Polycarbonate 0.250 in
6.35 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCP968256 Polycarbonate 0.375 in
9.525 mm 		N/A N/A 48.000 x 96.000 in
1219.2 x 2438.4 mm 		Sheets
PPCR681016 Polycarbonate N/A 0.250 in
6.350 mm 		N/A 8 ft Rods
PPCR681020 Polycarbonate N/A 0.375 in
9.525 mm 		N/A 8 ft Rods
PPCR968248 Polycarbonate N/A 0.500 in
12.700 mm 		N/A 8 ft Rods
PPCR681028 Polycarbonate N/A 0.625 in
15.875 mm 		N/A 8 ft Rods
PPCR968249 Polycarbonate N/A 0.750 in
19.050 mm 		N/A 8 ft Rods
PPCR681032 Polycarbonate N/A 0.875 in
22.225 mm 		N/A 8 ft Rods
PPCR681034 Polycarbonate N/A 1.000 in
25.400 mm 		N/A 8 ft Rods
PPCR681038 Polycarbonate N/A 1.125 in
28.575 mm 		N/A 8 ft Rods
PPCR681039 Polycarbonate N/A 1.250 in
31.750 mm 		N/A 8 ft Rods
PPCR681040 Polycarbonate N/A 1.375 in
34.925 mm 		N/A 8 ft Rods
PPCR968251 Polycarbonate N/A 1.500 in
38.100 mm 		N/A 8 ft Rods
PPCR681043 Polycarbonate N/A 1.750 in
44.450 mm 		N/A 8 ft Rods
PPCR968252 Polycarbonate N/A 2.000 in
50.800 mm 		N/A 8 ft Rods
PPCT681010 Polycarbonate N/A 0.125 in
3.175 mm 		0.250 in
6.35 mm 		8 ft Tubes
PPCT681011 Polycarbonate N/A 0.125 in
3.175 mm 		0.375 in
9.525 mm 		8 ft Tubes
PPCT681012 Polycarbonate N/A 0.188 in
4.7752 mm 		0.313 in
7.9502 mm 		8 ft Tubes
PPCT681013 Polycarbonate N/A 0.188 in
4.7752 mm 		0.500 in
12.7 mm 		8 ft Tubes
  Results 1 - 25 of 41 1 2